Page 85 - 2019-2020 Interlink Supply Catalog

Stone, Tile, & Concrete Cleaning 83

CONCRETE, TILE AND GROUT CLEANING SYSTEM

Cleaning and Brightening Concrete Floors 3. Allow for 5 -10 minutes of dwell time. For concrete, if stains
have been deeply absorbed, allow 15 minutes of dwell time
1. For normal soiling, mix 32 ounces (1 quart) of so the solution has time to reach into the concrete pores and
Viper Peroxibright CTG with gallon of warm or crevices and the oxygen activated effervescent solution can
hot water (1:4) into a professional sprayer. For dissolve the soiling and lighten discoloration.
heavy soiling, mix two quarts (64 ounces) of
Viper Peroxibright CTG with a gallon of warm 4. For best results, agitate and extract cleaning solution using
or hot water (1:2) into a professional sprayer. warm or hot water and a rotary agitation surface cleaner
such as a Hydro-Force SX-15 or SX-7. For tight spaces or
2. Apply mixed solution with sprayer evenly and especially sensitive surfaces, use the Hydro-Force Gekko CHEMICALS
liberally across surface to be cleaned. You can Hard Surface Extraction Tool, or simply mop to rinse with
use a pump-up sprayer or a battery powered clean warm or hot water.
sprayer like the Flexi-Pro. If preferred, you can apply mixed
solution with a damp mop, sponge, or other appropriate 5. When area has been rinsed thoroughly, allow floor to dry.
professional equipment. Accelerate drying with air mover like the OmniPro OmniDry
Air Mover.
3. For best results, agitate and extract cleaning solution using
warm or hot water and a rotary agitation surface cleaner
such as a Hydro-Force SX-15 or SX-7. For tight spaces or
especially sensitive surfaces, use the Hydro-Force Gekko Concrete, Stone, Tile
Hard Surface Extraction Tool, or simply mop to rinse with
clean warm or hot water.
and Grout Equipment
4. When area has been rinsed thoroughly, allow floor to dry.
Accelerate drying with air mover like the OmniPro OmniDry
Air Mover.

Cleaning and Degreasing Concrete Floors

Viper Peroxiblast Powder is a high
performance, alkaline, heavy-duty concrete, tile
and grout cleaner and degreaser that safely
replaces mineral spirits and chlorinated solvent-
based heavy-duty concrete degreaser products.
Viper Peroxiblast Powder penetrates concrete
surfaces on contact to soften, lift, and remove a
wide range of oils, soils, and greases.
See pages 195-198 & 210-211.
1. For normal soiling, mix 2 ounces of Viper
Peroxiblast Powder with one gallon of warm or hot water into
a professional sprayer. For extreme soiling, mix 3-4 ounces of Grout Sealing Tools
powder with a gallon of warm of hot water into a professional
sprayer. For application through a Hydro-Force Inline
Injection Sprayer, mix 12 oz. of powder and fill container with
water. Use 1:4 dilution.

2. Apply mixed solution with sprayer evenly and liberally across
surface to be cleaned. If preferred, you can apply mixed
solution with a damp mop, sponge, or other appropriate
professional equipment.
See page 198.

www.interlinksupply.com