Page 137 - 2019-2020 Interlink Supply Catalog

Heaters & Heat Drying 135

Power Cord w/GFCI, 10/3 Extension Power Cord, 10/3 x Adapter Cord, 4-Prong Dryer Adapter Cord, 3-Prong Range
x 50’ (Standard equipment 50’ (3-Prong, 30 Amp) Plug (Standard equipment Plug (50 Amp)
included with E-TES SD) included with E-TES SD)
NM4403 NM4420
NM4402
NM4422

Exhaust Controller
Exhaust Controller gives you thermostatic
control to adjust exhaust air flow according to
room temperature in your drying area. Oper-
ates two fans with set point temperatures up
to 140°F.
MB230

Adapter Cord, 4-prong E-TES Adapter Cord Bucket Heater
Range Plug (50 Amp) - 240 volt - L6-30P 30 Never Be Caught Without Hot Water Again!
Amp twist lock plug. This 1,000 watt immersion heater will heat one gallon of water
NM4424
Use with generator or from 60 to 130 Fahrenheit in ten minutes. Automatic safety
power box. shutoff switch reduces fire hazard. (Bucket not included) EQUIPMENT & INSTRUMENTS
NM4426
AX28
Snout Adapter

The Snout Adapter for TES allows you to take Directed
Heat Drying™ to a whole new level. Now you can fine
tune your focused heat to the exact areas you need to
dry. The Snout Adapter fits easily over the front of the
TES TEX box or the E-TES 240 or 120 units. Use the 4”
high temperature flex ducts to distribute heat to multiple surfaces all at the same time. Ideal for use
in drying cabinets, attics or any other hard to reach areas. Kit includes: (1) snout adapter, (2) 25’
high temperature flex ducts, (2) snout covers, (1) bungee cord, and (4) vent clasps.
AT106

Propane Water Heaters
HF2000 In-Line
Heater These propane water heaters deliver out-
standing heat for both truckmount and por-
This 2000 watt, 13.4-amp heater with failsafe 250° F back-up table units. The 120,000 BTU unit is capable
thermostat is a must for portable cleaning when extra heat is re- of a 120 degree heat rise at 1.25 GPM and
quired — or use it to provide supplemental heat to truckmounts. 60 degrees at 2.5 GPM! The 65,000 BTU unit
Supplied with quick connects and ready to attach to your solu- delivers a 100 degree heat rise at .9 GPM and
tion line, the HF2000 is automatically controlled up to 220° F, 60 degrees at 1.5 GPM. Thermostatically con-
features a stainless steel heat chamber rated to 1000 PSI and a trolled and adjustable to 200° F plus.
25-amp circuit breaker. Includes cord wrap, carrying handle and
lighted switch.
AX39 65,000 BTU AX42
120,000 BTU AX43HP
www.interlinksupply.com