Page 103 - 2019-2020 Interlink Supply Catalog

Mold Removers & Prevention 101

IAQ 5000 Stain Blocking IAQ 6000HD (Heavy Duty)
Primer Mold Resistant Coating -
White
Fiberlock IAQ 5000 is a quick drying, high
performance 100% acrylic latex coating Fiberlock IAQ 6000HD is a high-build,
specifically designed to prime stained or mold-resistant coating designed to help
water damaged surfaces. This stain block- prevent mold growth from occurring in
ing primer provides exceptional adhesion new building construction. Fiberlock IAQ
and may be used on interior or exterior 6000HD is designed for use on building
surfaces to seal porous surfaces, provide materials including gypsum wallboard, ori-
adhesion to hard and glossy surfaces, ented strand board (OSB), wood framing
and prevent most bleeding type stains. timbers, plywood, and any other surface
Fiberlock IAQ 5000 is recommended for where a flexible high-build mold-resistant CHEMICALS
use on wallboard, plaster, sheetrock, coating is necessary. Fiberlock IAQ
masonry, wood, concrete, aluminum, and 6000HD contains dual EPA-registered,
galvanized metal. broad-spectrum fungicides to provide
maximum protection against mold growth
5 gallon pail CR666PL on the coating film.
5 gallon pail CR672PL
IAQ 1000 Mold
Remediation Cleaner Concrobium Pro Mold
Control 14 oz Aerosol
IAQ 1000 is a hydrogen peroxide
based biodegradable, chlorine free Concrobium Mold Control is a professional-
cleaner. IAQ 1000 is pH neutral, and grade, EPA-registered solution that eliminates
contains an agent that will whiten mold and prevents it from coming back. Concro-
and brighten while cleaning, but does bium Mold Control contains zero toxic chemicals
not contain bleach. IAQ 1000 comes such as bleach or ammonia, and is Green-Spec
ready-to-use in a 5 gallon container. listed. The solution is ideal for mold remediation
pail CR665PL in homes and businesses, and for mold clean-up
and prevention following water damage.
Advanced Peroxide Cleaner CR350AE

Advanced Peroxide Cleaner is the most advanced cleaner available for the restoration and remediation profes-
sional. It aggressively removes stains caused by mold and mildew on porous, semi-porous and non-porous materi-
als. Utilizing a proprietary combination of cutting-edge surfactants and advanced hydrogen peroxide, Advanced
Peroxide Cleaner penetrates deep into the substrate. The hydrogen peroxide reacts instantly through an oxidation
process that produces high foaming action which lifts the material to the surface. 2.5 gallon container.

(Sold in a case of 2) CR667CS
Gallon CR667GL
Hydro Boost Quart CR661QT
On & Gone Fast Mold Mold Gone 4 Good
Stain Remover

On & Gone™ is a fast mold stain remover for use Gone 4 Good™ is a high pH
on porous and nonporous surfaces. On & Gone surface protector, engineered
is an extremely effective remover of black mold to be used immediately after
stains from surfaces such as attic sheeting, left in a surface has been cleaned of
place wood framing, masonry, and other typical mold stains with On & Gone
surfaces where mold has appeared. Attics, crawl to prevent the regrowth of mold. Gone 4 Good permanently
spaces, and wall cavities are typical application bonds to surfaces such as attic sheeting, left in place wood
sites. On & Gone is part of a remediation protocol framing, masonry, and other typical surfaces where mold
which includes Hepa vaccuuming of fruiting mold, stains have been cleared from. Attics, crawl spaces, and
disinfection of the surface, removal of black stains wall cavities are typical application sites.
and encapsulation.
RTU pH = 12.0 www.interlinksupply.com 1 kg package 1637-5610
gallon 1631-5412